Boiler Steel Pipe, Industrial heating surface
- Description
- Specification
- Comments
Description:
Products will be used for the heating surface of high temperature boiler, economizer, header, superheater, reheater and for petrochemical industry etc.
Applications:
Products will be used for the heating surface of high temperature boiler, economizer, header, superheater, reheater and for petrochemical industry etc.
Heat treatment methods applied in the boiler pipes:
Quenching:Hardening, also called quenching, is that high pressure boiler pipe is heated evenly to the appropriate temperature, then quickly immerse in water or oil for rapid cooling, and cooling in the air or in the freezing zone. So that the high-pressure boiler pipe can obtain the required hardness.
Tempering:High pressure boiler pipe will become brittle after hardening. And the stress caused by quenching can make the high-pressure boiler pipe tapped and broken. The tempering method can be used to eliminate brittleness. Although the hardness of high-pressure boiler pipe is lighter reduced, its the toughness can be increased to reduce the brittleness.
Annealing:Annealing is the method to eliminate the internal stress of high-pressure boiler pipe. The annealing method is that the steel parts need to be heated to the critical temperature, then put in dry ash, lime, asbestos or closed in the furnace, then let it cooling slowly.
Outside Diameter:21.3mm - 1067mm
Wall Thickness: 2mm- 150mm
Length: 1m-12m
Standard:
ASME SA106 | Seamless carbon steel pipe for high temperature |
ASME SA179 | Seamless cold drawn low carbon steel pipe for heat exchanger and condenser |
ASME SA192 | Seamless carbon steel boiler tube for high pressure |
ASME SA210 | Seamless medium carbon steel pipe for boilers and superheaters |
ASME SA213 | Seamless ferritic and austenitic alloy steel tubes for boilers, superheaters and heat exchangers |
ASME SA335 | Seamless ferritic alloy steel pipe for high temperature |
DIN17175 | Seamless steel pipe made of heat-resistant steel |
EN10216-2 | Non-alloy steel and alloy steel pipes with high temperature performance |
GB5310 | Seamless steel pipe for high pressure boiler |
GB3087 | Seamless steel pipe for low and medium pressure boilers |
Trusted Customers or End Users of Boiler Steel Pipe:
Outside Diameter:21.3mm - 1067mm
Wall Thickness: 2mm- 150mm
Length: 1m-12m
Standard:
ASME SA106 | Seamless carbon steel pipe for high temperature |
ASME SA179 | Seamless cold drawn low carbon steel pipe for heat exchanger and condenser |
ASME SA192 | Seamless carbon steel boiler tube for high pressure |
ASME SA210 | Seamless medium carbon steel pipe for boilers and superheaters |
ASME SA213 | Seamless ferritic and austenitic alloy steel tubes for boilers, superheaters and heat exchangers |
ASME SA335 | Seamless ferritic alloy steel pipe for high temperature |
DIN17175 | Seamless steel pipe made of heat-resistant steel |
EN10216-2 | Non-alloy steel and alloy steel pipes with high temperature performance |
GB5310 | Seamless steel pipe for high pressure boiler |
GB3087 | Seamless steel pipe for low and medium pressure boilers |
Grade:
Standard | Grade | OD | WT |
ASME SA106 | SA106B、SA106C | 21.3-1067mm | 2-150mm |
ASME SA179 | SA179 | 19-76.2mm | 2-15mm |
ASME SA192 | SA192 | 19-177.8mm | 2-30mm |
ASME SA210 | SA210A1、SA210C | 19-127mm | 2-20mm |
ASME SA213 | T11、T12、T22、T23、T91、T92 | 19-127mm | 2-20mm |
ASME SA335 | P11、P12、P22、P23、P36、P91、P92 | 60.3-1067mm | 2-150mm |
DIN17175 | ST35.8、ST45.8、15Mo3、13CrMo44、10CrMo910 | 19-1067mm | 2-150mm |
EN10216-2 | P195GH、P235GH、P265GH、16Mo3、13CrMo4-5、10CrMo9-10、 | 19-1067mm | 2-150mm |
15NiCuMoNb5-6-4(WB36)、X10CrMoVNb9-1、X10CrWMoVNb9-2 | |||
GB5310 | 20G、20MnG、25MnG、15CrMoG、12Cr1MoVG、12Cr2MoG、 | 19-1067mm | 2-150mm |
15Ni1MnMoNbCu、12Cr2MoWVTiB、10Cr9Mo1VNbN、10Cr9MoW2VNbBN | |||
GB3087 | 10、20 | 19-1067mm | 2-150mm |
● The packing is very strong and make the pipes in good condition. ___Hubery(Turkey)
● Logistics is nice, if it can be more fast, it will be better. ___Ethan(Bahrain)
● Painting with black for free, the service is good. ___Barret(Israel)
● Pipes used is very well. ___Steven(Panama)
● a little bad, hope improving in next. ___Benedict(Uruguay)