All Categories

Serûpel>Services>Resources

Resources

Raw Materials

20190723095087188718               Bar

With the features of high level purity, precise chemical composition control, high reduction ratio, high dimensional accuracy and excellent surface quality, the products are mainly used to manufacture the axle shaft, gas cylinder and plastic mould, etc.

Mal

Carbon Steel Bar,Cold Rolled Steel Bar,Hot Rolled  Steel Bar,Galvanized Steel Bar,Alloy Steel Bar

types

Round Bar,Hex Bar,Square Bar,Rolled Flat Bar,Sheared  & Edged Bar

sizes

6mm-50mm

20190723095483978397               Heavy Plate

Heavy plates are mainly used in shipbuilding, offshore platform, boiler, pressure vessel, pipeline, high building, bridge and heavy duty truck.

Mal

EN 10025-2,ASTM A36/A36M,ASTM A283/A283M,ASTM  A573/A573M,JIS G 3101

types

Mild low-carbon steel,High-strength  steel,Abrasion-resistant steel,Steel armor plate

Qewîtî

6 - 40 mm shear cutting / 40.01 – 160 mm flame  cutting

20190723095714711471               HR Steel Sheet

With the excellent properties such as high strength, good toughness, easy machinability and good weldability, Baosteel"s hot-rolled steel products are widely used in ship, automobile, bridge, building, machinery and pressure vessel and other industrial applications.

Mal

S315MC – S560MC, S235 – S355, S235 – S355

Mezinayî

Thickness:1.5-4.0mm, Width: 200-1750mm, Length:  100-6000mm

20190723095931533153               CR Steel Sheet

CR steel sheets have good processability, with good flatness and excellent surface, are available with different thickness and width combinations; are mainly used to manufacture the high value-added products in automotive and appliance, beverage packaging, electronic, electrcial moor and building etc. 

Wek herdem

EN10130, EN10268

Mezinayî

Thickness:0.4-3.0mm, Width: 20-1700mm,     Length: 100-6000mm

20190723100150655065               Steel Carbon

Carbon steel is steel where the main interstitial alloying constituent is carbon in the range of 0.12-2.0%. Suitable for nominal pressure PN ≤ 32.0MPa, temperature -30-425 ℃ water, steam, air, hydrogen, ammonia, nitrogen and petroleum products, and other media.

types

High-carbon steel, Low-carbon steel, Structure steel

Qedandin

Hot rolled plate (HR), Cold rolled sheet (CR), 2B,  2D, BA NO(8), SATIN (Met with Plastic Coated)

Şikil

Coils, Foils, Rolls, Plain Sheet, Shim Sheet,  Perforated Sheet, Chequered Plate, Strip, Flats, Blank (Circle), Ring  (Flange) etc.

2019072310030597597               Alloy Steel

Alloy steel is often subdivided into two groups: high alloy steels and low alloy steels. The difference between the two is defined somewhat arbitrarily. However, most agree that any steel that is alloyed with more than eight percent of its weight being other elements beside iron and carbon, is high alloy steel. 

types

High Tensile Steel, Case Hardening Steels and Steels  specially developed for their nitriding properties.

Mal

9CR-L80,13CR-L80,4130,4130M,4140,4145,4145M,4340,4330  V-MOD,8630MOD,C90,C110,L80,P110,Q125,T95

20190723100343664366               Tev stîl

Stainless steel does not readily corrode, rust or stain with water as ordinary steel does, but despite the name it is not fully stain-proof, most notably under low oxygen, high salinity, or poor circulation environments. It is also called corrosion-resistant steel or CRES when the alloy type and grade are not detailed, particularly in the aviation industry.

types

Stainless steel bar, stainless steel plate &  sheet, stainless steel coil/strip

Mal

SS 304, 304L, 304H, 316, 316L, 316LN, 316Ti, 309,  310S, 317L, 321, 347, 409, 410, 420, 430, 446, 202 Etc.

20190723100433363336               Black Steel

Black steel is a term given to steel pipe with a black oxide scale on the surface. This black oxide scale is formed when the pipe is forged and is typically sealed with a protective oil to prevent corrosion. Because of this oxide scale and protective film, black steel pipe requires little maintenance and is used for a wide variety of applications, including in water, steam, air and gas services. 

types

ERW black steel pipe

Mal

ASTM A-53 Grade A

sizes

1/2 "-2"