All Categories

Serûpel>Products>Alloy Steel Pipes>Tubes Boiler Superheater

Boyler Boiler Superheater, ASTM A556 lûleya pola superheater

H002aab91535c4c51927c6172a374cf49V
1-1912251554451W
Ra049204d4a874cafe52f2a06e233f377
Boyler Boiler Superheater, ASTM A556 lûleya pola superheater
Boyler Boiler Superheater, ASTM A556 lûleya pola superheater
Boyler Boiler Superheater, ASTM A556 lûleya pola superheater

Boyler Boiler Superheater, ASTM A556 lûleya pola superheater

Seamless Superheater alloy Steel Tube 

ASTM A556 lûleya pola superheater

ASTM A209; ASTM A250; ASTM A213;ASTM A556,


Pirs
  • Terîf
  • Specification
  • Comments

Terîf:

Alloy steel boiler tubes are based on ASTM A250 standard. It covers standard specification for several grades, designated T1, T1a, T1b, T2, T11, T12, and T22, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and chromium-molybdenum alloy-steel, boiler and superheater tubes.

ASTM A556 / A556M - 96 (2012) Specification Standard ji bo lûleyên Germkirina Avê ya Germkirinê ya Karbonê Steel-Sar-Sam
ASTM A556 Superheater Steel Tube
ASTM A 556 M - 88 / ASME 556 /ASTMA556M-88/ASME556

Applications:

Têkiliya Brief
Alloy steel boiler tubes are based on ASTM A250 standard. It covers standard specification for several grades, designated T1, T1a, T1b, T2, T11, T12, and T22, of minimum-wall-thickness, electric-resistance-welded, carbon-molybdenum and chromium-molybdenum alloy-steel, boiler and superheater tubes.
The tubes shall have a hardness not exceeding the specified values for brinell hardness and rockwell hardness numbers. When the final heat treatment is in a continuous furnace, the number of tubes of the same size and from the same heat in a lot shall be determined from the given size of the tubes.

ASTM A556 / A556M - 96 (2012) Specification Standard ji bo lûleyên Germkirina Avê ya Germkirinê ya Karbonê Steel-Sar-Sam
ASTM A556 Superheater Steel Tube
ASTM A 556 M - 88 / ASME 556 /ASTMA556M-88/ASME556
Stainless Steel Square Tubes Square TubesStainless Steel Rectangular Tubes Rectangular Tubesinner packing Oval pipesStock room Storehouse

ASTM A556 is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

Specification

Wek herdemASTM A556, ASME SA556

Grade Steel

SA556Gr.B2, SA556Gr.C2

Size Range

Outer Dimensions: 12mm - 40mm

Wall Thickness: 1mm - 5mm

Dirêjahî: herî zêde 16000mm

Şehade

The products are supplied with 3.1   specific test certificates, according to EN 10204. Certification according to   3.2 can be agreed at the time of ordering.

Dermankirina rûyê erdê

Oil-dip, Varnish, Passivation,   Phosphating, Shot Blasting.

Both ends of each crate will   indicate the order no., heat no., dimensions, weight and bundles or as   requested.

Bixçe

Bare packing/bundle packing/crate   packing/wooden protection at the both sides of tubes and suitably protected   for sea-worthly delivery or as requested.




Pêvajoya uringêkirinê:
Electric-resisitance welding

Dermankirina Heat:
1. After welding or when cold finished, after the final cold-drawing pass, all tubes shall be heat treated and, except asprovided in 5.3.2. furnished in the full annealed, isothermal annealed, normalized, or normalized and tempered condition at the option of the manufacturer, if furnished in the normalized and tempered condition, the minimum temperingtemperature shall be 1200°F except T22 shall be tempered at 1250°minimum.
2. when grades T1, T1a, T1b and T2 are cold finished, the tubes may at the option of the manufacturer, be heat treated after the final cold-drawing pass at a temperature of 1200°F or higher, provided one of the heat treatments specified in 5.3.1 was applied after welding.
Resistant high and low temperature or resistant corrosion-resistant in the oil, chemical, electric powder industry. KRM is a professional boriyeke pola alloy manufacture and supplier. We stock large quality of A-250 T22 straight alloy steel pipe every month. If you have any need of ASTM A-250 please do not hesitate to contact us .


Xerîdarên pêbawer an bikarhênerên dawî yên Tubes Boiler Superheater:

5

Wek herdemASTM A556, ASME SA556

Grade Steel

SA556Gr.B2, SA556Gr.C2

Size Range

Outer Dimensions: 12mm - 40mm

Wall Thickness: 1mm - 5mm

Dirêjahî: herî zêde 16000mm

Şehade

The products are supplied with 3.1   specific test certificates, according to EN 10204. Certification according to   3.2 can be agreed at the time of ordering.

Dermankirina rûyê erdê

Oil-dip, Varnish, Passivation,   Phosphating, Shot Blasting.

Both ends of each crate will   indicate the order no., heat no., dimensions, weight and bundles or as   requested.

Bixçe

Bare packing/bundle packing/crate   packing/wooden protection at the both sides of tubes and suitably protected   for sea-worthly delivery or as requested.


● Delivery time is short and catch up our work.    ___Kellen (UAE)

● The order is with happy,looking forward to next.     ___Kermit (Spain)

● Packing is stable.   ___Yolanda (Chile)

● Offer timely.   ___Teresa (Brazil)

VEKOLÎN